| General | NX-1700H | NX-1800H** | |
|---|---|---|---|
| Frequency Range | 136-174 MHz | 400-470 MHz | |
| Max. Channels Per Radio | 260 | ||
| Number of Zones | 128 | ||
| Max. Channels per Zone | 250 | ||
| Channel Spacing | Analog | 12.5/25* kHz | |
| Digital | 6.25/12.5 kHz | ||
| Power Supply | 13.6 V DC ±15% | ||
| Current Drain | Standby | 0.45 A | |
| RX | 2.4 A | ||
| TX | 13 A | ||
| Operating Temperature | -22ºF to +140ºF (-30ºC to +60ºC) | ||
| Frequency Stability | ±0.5 ppm | ||
| Dimensions | (W x H x D) Projections Not Included | ||
| 6.34 x 1.69 x 6.62 in. | |||
| (161 x 43 x 168.2 mm.) | |||
| Weight Radio | 2.67 lbs (1.21 kg) | ||
| FCC ID | Type 1 | K44517000 | K44517100 (Pending) |
| Type 2 | |||
| FCC ID | Type 1 | 282F-517000 | 282F-517100 (Pending) |
| Type 2 | |||
| IC Certification | 282F-501001 | 282F-501102 | |
| Receiver | NX-1700H | NX-1800H** | |
| Sensitivity | NXDN® 6.25 kHz Digital (3% BER) | 0.18 μV | |
| NXDN®12.5 kHz Digital (3% BER) | 0.22 μV | ||
| DMR Digital 12 kHz (5% BER) | 0.18 µV | ||
| Analog 12 kHz (12dB SINAD) | 0.20 μV | ||
| Analog 25 kHz (12dB SINAD) | 0.24 μV | ||
| Sensitivity | Analog @ 12.5kHz | 65 dB | |
| Analog @ 25kHz | 81 dB | ||
| Intermodulation | 73 dB | ||
| Spurious Rejection | 75 dB | ||
| Audio Distortion | 3% | ||
| Audio Output Power | 6 W/ 4 W 4 Ω | ||
| Transmitter | NX-1700H | NX-1800H** | |
| RF Power Output | 50 W / 25 W / 5 W | 45 W / 25 W / 5 W | |
| Spurious Emission | -73 dB | -75 dB | |
| FM Hum & Noise | Analog @ 12.5kHz | 40 dB | |
| Analog @ 25kHz | 50 dB | ||
| Audio Distortion | 3% | ||
| Emission Designator | 16K0F3E, 11K0F3E, 8K30F1E, 8K30F1D, 8K30F7W, 4K00F1E, 4K00F1D, 4K00F7W, 4K00F2D, 7K60FXD, 7K60FXW, 7K60FXE, 7K60F1E, 7K60F1D, 7K60F1W |
||
*25/30 kHz in VHF/UHF Bands are not included in the models sold in the USA or US territories.
Analog measurements made per TIA603. Specifications are measured according to applicable standards.
Specifications shown are typical and subject to change without notice, due to advancements in technology.
** Future release
NXDN® is a registered trademark of JVCKENWOOD Corporation and Icom Inc.
NEXEDGE® & FleetSync® are a registered trademarks of JVCKENWOOD Corporation.
All other trademarks are the property of their respective holders.
| MIL Standard | MIL 810C Methods/Procedures | MIL 810D Methods/Procedures | MIL 810E Methods/Procedures | MIL 810F Methods/Procedures | MIL 810G Methods/Procedures | MIL 810H Methods/Procedures |
|---|---|---|---|---|---|---|
| Low Pressure | 500.1/Procedure I | 500.2/Procedure I, II | 500.3/Procedure I, II | 500.4/Procedure I, II | 500.5/Procedure I, II | 500.6/Procedure I, II |
| High Temperature | 501.1/Procedure I, II | 501.2/Procedure I, II | 501.3/Procedure I, II | 501.4/Procedure I, II | 501.5/Procedure I, II | 501.7/Procedure I, II |
| Low Temperature | 502.1/Procedure I | 502.2/Procedure I, II | 502.3/Procedure I, II | 502.4/Procedure I, II | 502.5/Procedure I, II | 502.7/Procedure I, II |
| Temperature Shock | 503.1/Procedure I | 503.2/Procedure I | 503.3/Procedure I | 503.4/Procedure I, II | 503.5/Procedure I | 503.7/Procedure I |
| Solar Radiation | 505.1/Procedure I | 505.2/Procedure I | 505.3/Procedure I | 505.4/Procedure I | 505.5/Procedure I | 505.7/Procedure I |
| Rain* | 506.1/Procedure I, II | 506.2/Procedure I, II | 506.3/Procedure I, II | 506.4/Procedure I, III | 506.5/Procedure I, III | 506.6/Procedure I, III |
| Humidity | 507.1/Procedure I, II | 507.2/Procedure II, III | 507.3/Procedure II, III | 507.4 | 507.5/Prcedure II | 507.6/Prcedure II |
| Salt Fog | 509.1/Procedure I | 509.2/Procedure I | 509.3/Procedure I | 509.4 | 509.5 | 509.7 |
| Dust | 510.1/Procedure I | 510.2/Procedure I | 510.3/Procedure I | 510.4/Procedure I, III | 510.5/Procedure I | 510.7/Procedure I |
| Vibration | 514.2/Procedure VIII, X | 514.3/Procedure I | 514.4/Procedure I | 514.5/Procedure I | 514.6/Procedure I | 514.8/Procedure I |
| Shock | 516.2/Procedure I, II, III, V | 516.3/Procedure I, IV, V | 516.4/Procedure I, IV, V | 516.5/Procedure I, IV, V | 516.6/Procedure I, IV, V | 516.8/Procedure I, IV, V, VI |
| International Protection Standard | ||||||
| Dust & Water Protection*1 | IP54 (per IEC60529) | *1 All interfaces must be fully sealed with appropriate covers or by designated genuine accessories | ||||
