Title | 4/3 Channel Power Amplifier | |
---|---|---|
Amplifier Type | Class AB | |
Series | PERFORMANCE SERIES | |
CEA-2006 Primary Ratings | Power Output | 70Watts RMS x 4 at 4 Ohms and ≤1%THD+N |
Signal-to-Noise Ratio | 80 dBA (Reference: 1Watt into 4Ohms) | |
Maximum Power Output | MAX POWER | 1000W |
Power Output | Rated Power at 14.4V | 70Watts RMS x [ch] (4 Ohms, 20-20kHz, ≤1.00
% THD) 100Watts RMS x [ch] (2 Ohms, 1kHz, ≤1.00 % THD) 200Watts RMS x [ch/2] (Bridged 4 Ohms, 1kHz, ≤1.00 % THD) |
Specifications | Signal to Noise Ratio | 100dB (Reference: Rated Power into 4Ohms at 14.4V) |
Frequency Response | 20Hz-50kHz (+0dB, -3dB) Class AB |
|
Input Impedance | 10k ohm | |
Speaker Impedance (Single End connection) | 4Ω ( 2 Ω to 8 Ω allowable) | |
Speaker Impedance (Bridged connection) | 4 Ω to 8 Ω allowable | |
Audio Section | Low-Pass Filter | Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct) |
High-Pass Filter | Built in High-Pass Filter (80Hz, -12dB/oct) | |
RCA Input Sensitivity | 0.2[V] - 5.0[V] | |
Speaker Level Input Sensitivity | 4.0[V] - 12.0 [V] | |
Terminals | Battery & Ground | Screw Type Terminal Block (Nickel colored) (M4) |
Speaker Output | Screw Type Terminal Block (Nickel colored) (M4) | |
Line In | RCA (Nickel colored) | |
Speaker Input | Connector (Balance) | |
General | Dimensions(WxHxD) | 335 [mm] x 56 [mm] x 204 [mm] 13-3/16 inch x 2-3/16 inch x 8-1/16 inch |
Weight (kg) | 2.6 [kg] 5.7 [lbs] | |
Operating Voltage | 14.4 V(11.0 - 16.0 V allowable) | |
Current Consumption | 32 [A] | |
Key Features | CTA-2006 Compliant 2 Ohms Load Capability Speaker Level Input Signal Sensing Turn-on Cooling Fan Power MOS-FET Switching Power Supply Cast Aluminum Heat Sink Design |
|
Others | Triangle Indicator |